Approved by AICTE, New Delhi

Affiliated to Anna University, Chennai

A Telugu Minority Institute

TNEA CODE

1106

Staff Achievement

SEMINAR ORGANIZED BY THE DEPARTMENT
  • AICTE sponsored National Seminar on “Energy conservation and thermal energy storage” on 12th & 13th Dec 2013.
FACULTY AWARDS
  • Patent, Research guidance, Guest Lectures delivered by Faculty, Publications.
STAFF ACHIVEMENTS AND PUBLICATIONS
  • The faculty of the department associate themselves with industries through industrial projects, in-plant training and industrial visits with organization like Ashok Leyland, Hyundai and Ford, etc,.
  • Participated and own many achievements in Symposium and conferences. They guide students to participate in state/national level symposium and contests.
  • The faculties are well talented and conducting technical seminars and aptitude test periodically for student’s placement.
  • The faculties published many papers in leading journals and magazines.
List Of Journal Publications:
  • Gurusamy, P, Balasivanandha Prabu, S & Paskaramooorthy, R 2015, ‘Prediction of cooling curves for squeeze cast Al/SiCp composites using finite element analysis’, Metallurgical and Materials Transactions A. vol 46A, pp 1697- 1703.
  • Gurusamy, P, Balasivanandha Prabu, S & Paskaramooorthy, R 2015, ‘Influence of processing temperatures on mechanical properties and microstructure of squeeze cast aluminum alloy composites’, Materials and Manufacturing Processes, vol 0: pp 1-7.
  • Gurusamy, P, Balasivanandha Prabu, S & Paskaramooorthy, R 2013, ‘Interfacial thermal resistance and the solidification behaviour of the Al/SiCp composites’, Materials and Manufacturing Processes, Vol.30, pp.381-386.
  • Gurusamy, P & Balasivanandha Prabu, S 2013, ‘Effect of the squeeze pressure on the mechanical properties of the squeeze cast Al/SiCp metal matrix composite’, International Journal of Microstructure and Materials Properties, vol. 8, pp. 299-312.
  • Gurusamy, P, Balasivanandha Prabu, S & Paskaramooorthy, R 2014, ‘The effect of the die temperature on the solidification behaviour of the Al/SiCp metal matrix composite: A finite element analysis’, Advanced Materials Research, vol. 893 pp 314-319.
  • Gurusamy, P, Balasivanandha Prabu, S & Paskaramooorthy, R 2013, ‘Effect of melt temperatures on the interfacial thermal resistance and the solidification behaviour of Al/SiCp composites’, Applied Mechanics and Materials, vol.606, pp.35-40.
  • Gurusamy, P & Balasivanandha Prabu, S 2014, ‘Influence of Squeeze Pressure on the Squeeze Cast Al/SiCp Metal Matrix Composite, Journal of Mechanical Engineering, International Journal of Applied Engineering Research, Vol. 10 No.71, pp.365-370.
  • Gurusamy, P & Balasivanandha Prabu, S 2015, ‘The Effect of the Die Temperature on the Thermo-elastic Stress Analysis of the Al/SiCp Metal Matrix Composite: A Comparative Study of Experimental and Finite Element Analysis, International Journal of Applied Engineering Research, Vol. 10, No.7,pp 349-354.
  • Gurusamy, P, Balasivanandha Prabu, S & Paskaramooorthy, R 2013, ‘Solidification Studies on Squeeze Cast A356-SiCp Composites’, Metallurgical and Materials Transactions B. (Submitted- Under Review).
  • Gurusamy, P, Balasivanandha Prabu, S & Paskaramooorthy, R 2015, ‘The effect of the squeeze pressure on the solidification behaviour of the Al/SiCp metal matrix composite: A comparative evaluation of experimental and finite element analysis’, Metallurgical and Materials Transactions A (Submitted- Under Review)
  • S.Rajendran1 and Dr.K.Purushothaman2 Analysis of a centrifugal pump impeller using ANSYS-CFX International Journal of Engineering Research & Technology (IJERT) Vol. 1 Issue 3, May – 2012 ISSN: 2278-0181
  • A technical paper was published by V.Chokkalingam in the CiiT International Journal of Programmable Device Circuits and systems, Vol. 3, NO: 9, August 2011.
  • S.Kuzhali, “Ecological Efficiency of IC engine using waste plastic oil over conventional Diesel”, ICSIE ‘ 14.
  • S.Rajendran, “Analysis of fuel flow in internal combustion Engine using – CFD”, International Review of Mechanical Engineering (IREME), Vol 8, No. 3 May 2014.
  • S.Rajendran, ‘A review of In-cylinder 1C engine with Air flow Turbulence and Spray models using CFD for Reducing Emission” International Journal of Applied Environmental Science.
  • Gurusamy, P, Balasivanandha Prabu, S & Nagasankar, P 2012, ‘Influence of mould temperature on the squeeze cast Al/SiCp metal matrix composite’, Proceedings of the International Conference on Recent Advances in Mechanical Engineering, Dr.MGR Educational & Research Institute University, Chennai, pp. 266-270.
  • • Gurusamy, P, Balasivanandha Prabu, S & Paskaramooorthy, R 2012, ‘Effect of pressure on the mechanical properties of squeeze cast Al/SiCp metal matrix composites’, Proceedings of the International Conference on Society for the Advancement of Material and Process Engineering , pp. 21-24.
  • Gurusamy, P & Balasivanandha Prabu, S 2013, ‘The effect of the melt temperature on the solidification behaviour of Al/SiCp metal matrix composite using a finite element analysis’, Proceedings of the International Conference on Advances in Materials Processing and Characterization , College of Engineering Guindy, Anna University, Chennai, pp. 288-292.
  • Gurusamy, P & Balasivanandha Prabu, S 2013, ‘Production and mechanical properties of SiCp particle-reinforced A356 aluminium alloy composites by squeeze casting method’, Proceedings of the International Conference on Advances in Engineering and Technology , Dr.MGR Educational & Research Institute University, Chennai, vol. 3, pp. 64-68.
  • Gurusamy, P, Balasivanandha Prabu, S & Paskaramooorthy, R 2013, ‘Effect of melt temperatures on the interfacial thermal resistance and the solidification behaviour of Al/SiCp composites’, Proceedings of the International Conference on Materials, Industrial, and Manufacturing Conference, Malaysia.
  • Gurusamy, P, Balasivanandha Prabu, S & Paskaramooorthy, R 2013, ‘The Effect of the die temperature on the solidification behaviour of the Al/SiCp Metal Matrix Composite: A Comparative Study of Experimental and Finite Element Analysis’, Proceedings of the International Conference on Advanced Materials and Engineering Materials , Singapore.
  • Gurusamy, P,1994, Group Technology in Manufacturing Industry, Proceedings of the Mechanical Engineering Association, Government Engineering College, Tirunelveli, pp. 5-9.
  • Gurusamy, P, Balasivandha Prabu, S, Nagasankar, P, Watson,& Sathyamoorthy 2012, ‘Influence of mechanical properties on woven roving mats with epoxy and unsaturated polyester’, Proceedings of the National Conference on Recent Trends in Automobile Engineering, SA Engineering College, Chennai, pp. 11-15.